]
Using skills of chip dryer
1. Before using, it is necessary to check the power connection state of the wood chip dryer and whether the fixed position of the rotary drum is correct. Connect the power supply, open the upper cover, turn on the motor switch, and let the rotary cylinder run idly. The direction of rotation should be the same as that of the arrow in the shell. After 5 minutes of working with the heating wire, no hot air is discharged. The machine should be shut down to check whether the air outlet of the electric heating wire is blocked.
2. It is necessary to put down the equipment cover when the wood chip dryer is used for drying, and the machine should be stopped during the loading and unloading process. During the process, the uniform distribution of the workpiece should be controlled to avoid the violent shaking of the dehydrator caused by the non parallel centrifugal force. The rotating drum can not overload or overfull. If the drying workpiece is small and dense, or easy to store liquid, first centrifugal drying for 1-2 minutes, take out the rotating micro, turn the workpiece over, and then heat and centrifugal dry to achieve satisfactory results. Customized drum dryer which good, choose Shandong Linqu Juneng drying equipment Co., Ltd., the equipment by Guangxi, Anhui, Jiangsu and Zhejiang provinces and regions consumers recognized and purchased.