Home >> News center>> Detail

Youshi of wood chip dryer

  The veneer dryer is mainly used for drying veneer, and it is a machine for producing plywood. Due to the high water content in the newly cut veneer, the purpose of the equipment is to reduce the water content of the veneer to meet the requirements and reduce the material loss. The equipment has the characteristics of high thermal efficiency and low heat loss, which can effectively improve the working efficiency and the quality of plywood products. However, when using the equipment, we have several considerations.

 Matters needing attention in the use of veneer dryer 

1. Don't put a lot of wooden boards at once When drying with veneer dryer, be careful not to put too many veneers at one time to save trouble. This situation will affect the drying effect of veneer and damage the equipment to a certain extent.

 2. Place the wooden boards evenly In order to ensure good drying effect of veneer, it is recommended to place veneer with uniform thickness and uniform size when placing wooden boards, so as to ensure the drying quality of veneer to the greatest extent. 

3. Pay attention to the ventilation of equipment In the drying process, due to the high internal temperature of the equipment, attention should be paid to the heat dissipation of the equipment itself. For the drying effect and long-term use of the equipment, pay attention to keep the ventilation and heat dissipation of the equipment during use.

 4. Daily maintenance and maintenance When the equipment is not in use, clean the equipment, inspect and repair the parts and components of the equipment, and pay attention to using lubricating oil for maintenance at the parts and joints of the equipment.

 In the process of using veneer dryers, attention should be paid to avoid fire hazards, and the use of equipment should comply with national fire safety regulations.